Search results for "arburg 130?tx_solr[q]=arburg 130"

Presentation times (Wed – Fri) German: 11.30am - 12pm English: 12.30pm - 1pm German: 1.30pm - 2pm English 3pm - 3.30pm Miriam Lauble (Product Manager) has worked at ARBURG since 2012 and has been a Product Manager in Business Development since 2022. [...] Presentation times (Wed – Fri) German: 10.30am - 11am English: 11.30am - 12pm English: 1pm - 1.30pm German: 2pm - 2.30pm Tobias Hinsche (Team Manager Project Management) has worked at ARBURG since 2007 and has been a Project Manager in Automation and Turnkey Solutions since 2018. [...] Presentation times (Wed – Fri) English: 10.30am - 11am German: 12pm - 12.30pm German: 1pm - 1.30pm English: 2pm - 2.30pm Dr.-Ing. Didier von Zeppelin (Consultant, ARBURGadditive) has worked at ARBURG since 2015 in the area of ARBURG Plastic Freeforming and has been a consultant and advisor on additive manufacturing at ARBURGadditive since 2022.

Abbreviation Material Temperature Time Density Output Operating mode [°C] [h] [g/cm³] [kg/h] ABS Acrylonitrile butadiene styrene 80 2-3 1.05 15 Fresh air/recirculating air CA Cellulose acetate 75 2-3 1.28 18 Fresh air/recirculating air CAB Cellulose acetate butyrate 70 2-3 1.18 17 Fresh air/recirculating air CP Cellulose propinate 70 3-4 1.20 12.5 Fresh air/recirculating air PA 6 Polyamide 6 80 4-5 1.13 9.5 Dry air PA 6.6 Polyamide 6.6 80 4-5 1.14 9.5 Dry air PA 6.10 Polyamide 6.10 80 4-5 1.14 9.5 Dry air PA 6.11 Polyamide 6.11 90 4-6 1.04 7.5 Dry air PA 6.12 Polyamide 6.12 90 4-6 1.04 7.5 Dry air PAN Polyacrylonitrile 80 2-3 16 Fresh air/recirculating air PBTP Polybutylene terephthalate 120 2-3 1.30 18 Dry air PC Polycarbonate 120 2-3 1.25 17.5 Dry air PE Polyethylene black 90 1-2 0.95 20 Fresh air/recirculating air PE Polyethylene 90 3 0.94 13 Fresh air/recirculating air PETP Polyethylene terephthalate 150 5 1.30 11 Dry air PI Polyimide 120 3 1.40 20 Dry air PMMA Polymethyl methacrylate 80 3-4 1.19 12.5 Dry air POM Polyoxymethylene 100 3 1.41 20 Fresh air/recirculating air PP Polypropylene 90 1-2 0.90 19 Fresh air/recirculating air PPO Polyphenylene oxide 110 2 1.10 23 Fresh air/recirculating air PS Polystyrene 80 1-2 1.05 22 Fresh air/recirculating air PSU Polysulphone 120 2-3 1.25 17.5 Dry air PUR Polyurethane 90 2-3 1.20 17 Dry air PVC Polyvinyl chloride 70 1 1.40 59 Dry air SAN Styrene acrylonitrile 80 2-3 1.08 15 Fresh air/recirculating air SB Styrene butadiene 80 2 1.06 22 Fresh air/recirculating air PEEK Polyether etherketone 150 2-3 1.32 18.5 Dry air PEI Polyetherimide 150 3-4 1.30 13.5 Dry air PEK Polyether ketone 150 4 1.30 13.5 Dry air PETG Polyethylene terephthalate glycol modified 65 3-4 1.27 13.5 Dry air PPA Polyphtalamide 90 10 1.43 6 Dry air PPE / SB Polyphenylene ether / High impact polystyrene, blend 80 2 1.06 22.5 Dry air PPS Polyphenylene sulphide 150 3-4 1.35 14 Dry air PPSU Polyphenylene sulphone 150 2-3 1.29 18 Dry air TEEE Polyester elastomer 110 2-3 1.20 17 Dry air PC / ABS Polycarbonate / acrylonitrile butadiene styrene, blend 100-110 2-3 1.12 15.5 Dry air PC / PBTP Polycarbonate / polyethylene terephthalate, blend 100-110 2-4 1.22 13 Dry air PC / PETP Polycarbonate / polyethylene terephthalate, blend 100-110 2-4 1.20 12.5 Dry air DINUS D IN DINUS D IN cyan yellow magenta key U S U S TECHNICAL DATA | THERMOLIFT 100-3 52 78 80 _E N _G B_ 09 20 18 · Su bj ec t to a lte ra tio ns Capacity of basic machine l 100 Capacity with container attachment l 200 Operating voltage 220 / 400 V 50 Hz Heating element kW 4.5 Fan kW 0.95 Conveyor height m 3 Conveying pressure bar 0.055 Dry air generator kW 0.74 Total power consumption excluding dry air generator kW 5.5 Total power consumption with dry air generator kW 6.2 Dry air quantity m3/h 90 Regenerated air quantity m3/h 20 Compressed air connection for vacuum conveying device bar 4...6 Air filter/rated max. flow rate m3/h 180 Injection units according to EUROMAP Screw diameter mm Polystyrene max. g PS Styrene heteropolymerizates max. g SB max. g SAN, ABS1) Cellulose acetate max. g CA1) Celluloseacetobutyrate max. g CAB1) Polymethyl methacrylate max. g PMMA Polyphenylene ether, mod. max. g PPE Polycarbonate max. g PC Polysulphone max. g PSU Polyamides max. g PA 6.6 | PA 61) max. g PA 6.10 | PA 111) Polyoximethylene (Polyacetal) max. g POM Polyethylene terephthalate max. g PET Polyethylene max. g PE-LD max. g PE-HD Polypropylene max. g PP Fluorpolymerides max. g FEP, PFA, PCTFE1) max. g ETFE Polyvinyl chloride max. g PVC-U max. g PVC-P1) 1) average value Theoretical shot weights for the most important injection moulding materials ARBURG GmbH + Co KG Arthur-Hehl-Strasse 72290 Lossburg Tel.: +49 7446 33-0 www.arburg.com contact@arburg.com © 2018 ARBURG GmbH + Co KG | All data and technical information have been compiled with great care.

Δp bar 1,5 | DN 25 1,5 | DN 25 2 | DN 25 Machine type with EUROMAP size designation ¹ 370 A 600-100 | 170 | 290 370 A 600 --- 300 --- 200-400 --- 500-700 370 370 510 510 360 25 100 259 1 259 0,8 259 100 170 290 25 30 35 20 20 20 100 120 150 49 85 144 45 77 132 8 13,5 20,5 4 7 10,5 2000 2000 2000 300-1600 300-1600 300-1600 100 [130] 114 [150] 144 [191] 130 150 191 148 [197] 214 [285] 288 [384] 280 [350] 215 [280] 215 [280] 350 280 280 50 60 60 350 [400] 350 [400] 350 [400] 150 250 380 50 230 50 300 50 300 6,7 5 9 5 7,7 5 50 50 50 Comfort Premium Ultimate 170 170 170 3740 3740 3740 66 | 3 66 | 3 66 | 3 19 24 24 63 80 80 --- --- --- --- --- --- 30 30 30 Upon request: other machine types and mould installation heights, screws, drive powers etc. [...] Standard Thermoset Robotic system mounting | C M8-16 deep M12-24 deep Ejector bolt | X Bore in mould (if required) | Y max. 500 - 700 Closing force for spring moulds / during injection compression moulding* C lo si ng f or ce [k N ] Mould stroke [mm] * automatic locking force adjustment up to 20 kN Injection unit 100 / 170 / 290 40 20 MOULD INSTALLATION DIMENSIONS | 370 A DIN US D IN DIN US D IN U S U S 5 32 1, 5 640 59 6, 57014 0 21 0 28 0 35 0 42 0 70 140 210 280 350 420 12 5 H 7 17 0 53 4 630480 52 170 37 0 42 0 57 4 370 55 24 5 420 534 315 465 45 2 50 25 MOULD INSTALLATION DIMENSIONS | 370 A M12-24 deep Fixed mould mounting platen | A Moving mould mounting platen | B Bores for ARBURG mechanical mould rapid clamping system M8 thread - 16 deep for robotic system Injection units according to EUROMAP Screw diameter mm Polystyrene max. g PS Styrene heteropolymerizates max. g SB max. g SAN, ABS1) Cellulose acetate max. g CA1) Celluloseacetobutyrate max. g CAB1) Polymethyl methacrylate max. g PMMA Polyphenylene ether, mod. max. g PPE Polycarbonate max. g PC Polysulphone max. g PSU Polyamides max. g PA 6.6 | PA 61) max. g PA 6.10 | PA 111) Polyoximethylene (Polyacetal) max. g POM Polyethylene terephthalate max. g PET Polyethylene max. g PE-LD max. g PE-HD Polypropylene max. g PP Fluorpolymerides max. g FEP, PFA, PCTFE1) max. g ETFE Polyvinyl chloride max. g PVC-U max. g PVC-P1) 1) average value Theoretical shot weights for the most important injection moulding materials ARBURG GmbH + Co KG Arthur-Hehl-Strasse 72290 Lossburg Tel.: +49 7446 33-0 www.arburg.com contact@arburg.com © 2024 ARBURG GmbH + Co KG | All data and technical information have been compiled with great care. [...] The relevant valid operating instructions are applicable for the installation and operation of the machine. 170 25 30 35 54 77 105 53 76 103 52 74 101 61 87 119 56 81 110 56 80 109 50 72 98 57 81 111 58 84 115 53 77 104 50 72 98 66 96 130 64 92 126 41 59 80 42 60 82 43 62 84 86 124 169 76 109 148 65 94 127 60 87 118 290 30 35 40 97 132 172 95 129 168 93 126 165 109 148 194 101 138 180 100 136 178 90 122 160 102 139 181 105 143 187 96 131 171 90 122 160 120 163 213 115 157 205 73 100 130 76 103 134 77 105 137 155 211 276 136 185 242 117 159 208 108 147 192 100 20 25 30 29 45 65 28 44 63 27 43 62 32 50 73 30 47 68 30 46 67 27 42 60 30 47 68 31 49 70 28 44 64 26 41 60 35 55 80 34 53 77 22 34 49 22 35 50 23 36 51 46 72 103 40 63 91 35 54 78 32 50 72 52 64 47 _E N _G B_ 09 20 24 · Su bj ec t to a lte ra tio ns SHOT WEIGHTS | 370 A

DINUS D IN DINUS D IN U S U S 6 X Y B A E 370.5-1 34 0 1489 32.5 80 20 Ø 60 Ø 90 97.5 35 105 49 0 28 0 10 0 Ø 12 5H 7 12-0.1 19 Ø 32 -0 .1 Ø 24 Ø 32 50 3 30 ° Ø 82 Ø 64 Ø 43 40 ° 10 625 170 456 520 MOULD INSTALLATION DIMENSIONS | 470 S MULTI-COMPONENT Central ejection: Stroke max. 175 Stroke max. 500 Robotic system mounting | E M8-16 deep M12-24 deep Ejector bolt | X Bore in mould (if required) | Y min. 250 max. 750 max. 401)3) 502)3) Rotary unit4) (optional) 1) Injection unit 170-290 2) Injection unit 400 3) Dimensions for horizontally displaceable injection unit (VARIO principle) reduced by 20 mm 4) See separate facts and figures for information Central ejection Injection unit 170 / 290 Injection unit 400 DIN US D IN DIN US D IN U S U S 7 42 0 395 170 100 53 0 70 3 Ø 12 5H 7 66 5 17 0 470 68 33 6 22 40 3. 5 74 3. 5 47 0 545 70 140 210 280 350 420 48 8 35 0 28 0 21 0 14 0 70 85 Ø 60 530 665 560 710 490 Ø 12 5H 7 170 11 0 189 252 39 3. 5 49 0 56 0 560 800 4 x Ø30H7 MOULD INSTALLATION DIMENSIONS | 470 S MULTI-COMPONENT M12-24 deep M8-16 deep for robotic system Fixed mould mounting platen | A Moving mould mounting platen | B M10 for unscrewing device DINUS D IN DINUS D IN U S U S 8 C D X SW27 12-0.1 M 16 170 368.5-1 17 0 56.5 20 Ø 24 .8 145 229 383 M 16 52 10.5 (368.5-1) Ø 29 .8 5f 7 210 150 266 200 22 8. 5 Ø50 Ø601) Ø80 Ø901) Ø110 60 34 0 280 20 Ø60 Ø90 Ø110 65 a 4 x M16 DEVICE FOR PARTING LINE INJECTION | 470 S MULTI-COMPONENT Mount for vertical injection unit on carrierEjector plate | C Ejector plate reference diameter 170 1) Injection unit 100 2) For dimensions of hydraulic nozzle or mechanical mould mounting, see separate dimension sheet (on request) Off-centre ejection: Stroke max. 175 Injection unit 30 / 70 / 100 Injection unit 170 / 290 Injection positions for injection units2) 30 70 100 170 290 a min. 70 70 70 70 70 a max. 300 300 300 300 300 b min. 70 70 70 70 70 c min. 220 185 185 130 130 Injection unit 30 / 70 / 100 Injection unit 170 / 290 View DEjector coupling (optional) | X Bore in mould (if required) ab c ab c Off-centre ejection DIN US D IN DIN US D IN U S U S 9 Injection units according to EUROMAP Screw diameter mm Polystyrene max. g PS Styrene heteropolymerizates max. g SB max. g SAN, ABS1) Cellulose acetate max. g CA1) Celluloseacetobutyrate max. g CAB1) Polymethyl methacrylate max. g PMMA Polyphenylene ether, mod. max. g PPE Polycarbonate max. g PC Polysulphone max. g PSU Polyamides max. g PA 6.6 | PA 61) max. g PA 6.10 | PA 111) Polyoximethylene (Polyacetal) max. g POM Polyethylene terephthalate max. g PET Polyethylene max. g PE-LD max. g PE-HD Polypropylene max. g PP Fluorpolymerides max. g FEP, PFA, PCTFE1) max. g ETFE Polyvinyl chloride max. g PVC-U max. g PVC-P1) Theoretical shot weights for the most important injection moulding materials Injection units according to EUROMAP Screw diameter mm Polystyrene max. g PS Styrene heteropolymerizates max. g SB max. g SAN, ABS1) Cellulose acetate max. g CA1) Celluloseacetobutyrate max. g CAB1) Polymethyl methacrylate max. g PMMA Polyphenylene ether, mod. max. g PPE Polycarbonate max. g PC Polysulphone max. g PSU Polyamides max. g PA 6.6 | PA 61) max. g PA 6.10 | PA 111) Polyoximethylene (Polyacetal) max. g POM Polyethylene terephthalate max. g PET Polyethylene max. g PE-LD max. g PE-HD Polypropylene max. g PP Fluorpolymerides max. g FEP, PFA, PCTFE1) max. g ETFE Polyvinyl chloride max. g PVC-U max. g PVC-P1) 1) average value 70 18 22 25 21 31 40 20 31 39 20 30 39 24 35 45 22 33 42 22 32 42 19 29 37 22 33 42 23 34 44 21 31 40 19 29 37 26 39 50 25 37 48 16 24 30 16 24 31 17 25 32 33 50 65 29 44 57 25 38 49 23 35 45 290 30 35 40 97 132 172 95 129 168 93 126 165 109 148 194 101 138 180 100 136 178 90 122 160 102 139 181 105 143 187 96 131 171 90 122 160 120 163 213 115 157 205 73 100 130 76 103 134 77 105 137 155 211 276 136 185 242 117 159 208 108 147 192 400 35 40 45 141 184 232 137 179 227 135 176 223 158 207 262 147 192 243 145 190 240 131 171 216 148 193 244 153 199 252 140 183 231 131 171 216 174 227 287 167 219 277 106 139 176 110 143 181 112 146 185 225 294 372 196 256 324 170 222 281 157 205 260 100 20 25 30 29 45 65 28 44 63 27 43 62 32 50 73 30 47 68 30 46 67 27 42 60 30 47 68 31 49 70 28 44 64 26 41 60 35 55 80 34 53 77 22 34 49 22 35 50 23 36 51 46 72 103 40 63 91 35 54 78 32 50 72 30 15 18 9,5 14,0 9,5 13,5 9,5 13,5 11,0 15,5 10,0 14,5 10,0 14,5 9,0 13,0 10,0 14,5 10,5 15,0 9,5 14,0 9,0 13,0 12,0 17,0 11,5 16,5 7,5 10,5 7,5 11,0 7,5 11,0 15,5 22,5 13,5 19,5 11,5 17,0 11,0 15,5 170 25 30 35 54 77 105 53 76 103 52 74 101 61 87 119 56 81 110 56 80 109 50 72 98 57 81 111 58 84 115 53 77 104 50 72 98 66 96 130 64 92 126 41 59 80 42 60 82 43 62 84 86 124 169 76 109 148 65 94 127 60 87 118 SHOT WEIGHTS | 470 S MULTI-COMPONENT ARBURG GmbH + Co KG Arthur-Hehl-Strasse 72290 Lossburg Tel.: +49 7446 33-0 www.arburg.com contact@arburg.com © 2024 ARBURG GmbH + Co KG | All data and technical information have been compiled with great care.

Presseinformation Press Release Sustainability report for the year 2024 Arburg delivers convincing facts, figures - and action Online: New sustainability report from Arburg Successful: Activities and measures of the arburgGREENworld programme Impressive: 130,000 tonnes less CO2since 2010 Lossburg, 31.07.2025 The new sustainability report for 2024 is here - and presents the successful measures and activities of the arburgGREENworld programme with convincing facts, figures and actions. [...] Further information: www.arburg.com, www.amk-motion.com as well as www.arburg.com/arburgadditive. Level of confidentiality: ARBURG - General Level of confidentiality: ARBURG - General Page1 from 7Level of confidentiality: ARBURG - General

ALLROUNDER 520 S Distance between tie bars: 520 x 520 mm Clamping force: 1300, 1500, 1600 kN Injection unit (acc. to EUROMAP): 290, 400, 800 2 7821)5822)3) 11121) 13122)3) 12 0 8001)2) 12003) 44171) 48172)3) 33 0 625 21 71 1 ) 2 18 52 ) 2 19 13 ) 58 3 13 49 22 05 800 44861) 47952) 51623) 78 1 83 8 15 76 MACHINE DIMENSIONS | 520 S 1) injection unit 290 2) injection unit 400 3) injection unit 800 Electrical connection Cooling water connection m ax . 3 85 3 Clamping unit with clamping force max. kN 1300 1600 Opening force | stroke max. kN | mm | Mould height, fixed | variable min. mm | Platen daylight fixed | variable max. mm | Distance between tie bars (w x h) mm x Mould mounting platens (w x h) max. mm x Weight of movable mould half max. kg Ejector force | stroke max. kN | mm | Dry cycle time EUROMAP ² 1 pump min. s - mm 2,5 - 364 2 pumps min. s - mm 1,9 - 364 Accum. min. s - mm 1,7 - 364 Injection unit with screw diameter mm 30 40 35 45 45 55 Effective screw length L/D 23,3 17,5 23 18 22 18 Screw stroke max. mm Calculated stroke volume max. cm³ 106 188 154 254 318 474 Shot weight max. g PS 97 172 141 232 291 434 Material throughput max. kg/h PS 17 24,5 25 35 46 59 max. kg/h PA6.6 8,5 12,5 12,5 17,5 23 30 Injection pressure max. bar 2500 1530 2500 1580 2470 1650 Holding pressure max. bar 2500 1530 2500 1580 2470 1650 Injection flow ² 1 pump max. cm³/s 130 232 128 212 174 260 2 pumps max. cm³/s 130 232 128 | 160 212 | 266 174 260 Accum. max. cm³/s 316 562 492 814 530 792 Screw circumferential 1 pump max. m/min 51 69 47 60 54 66 speed ² 2 pumps max. m/min 51 69 47 | 53 60 | 68 54 66 Accum. max. m/min 20 27 16 21 15 19 Screw torque max. [...] Standard Thermoset Injection unit 290 400 / 800 40 50 20 50 DIN US D IN DIN US D IN U S U S 5 61 0 21 0 Ø 12 5 H 7 140 210 280 350 14 0 28 0 35 0 84 0 45 0 42 0 420 49 0 56 0 490 560 443 543 59 4 Ø 75 595 725 610 710 72 5 59 5 52 0 520 170 189 252 315 100 Ø25 90 38 0 23 69 170 11 0 Ø 12 5 H 7 MOULD INSTALLATION DIMENSIONS | 520 S Holes for ARBURG mechanical mould rapid clamping system M20-39 deep for robotic system Fixed mould mounting platen | A Moving mould mounting platen | B M10 for unscrewing device M12-24 deep for horizontally displaceable injection unit for central injection unit Injection units according to EUROMAP Screw diameter mm Polystyrene max. g PS Styrene heteropolymerizates max. g SB max. g SAN, ABS1) Cellulose acetate max. g CA1) Celluloseacetobutyrate max. g CAB1) Polymethyl methacrylate max. g PMMA Polyphenylene ether, mod. max. g PPE Polycarbonate max. g PC Polysulphone max. g PSU Polyamides max. g PA 6.6 | PA 61) max. g PA 6.10 | PA 111) Polyoximethylene (Polyacetal) max. g POM Polyethylene terephthalate max. g PET Polyethylene max. g PE-LD max. g PE-HD Polypropylene max. g PP Fluorpolymerides max. g FEP, PFA, PCTFE1) max. g ETFE Polyvinyl chloride max. g PVC-U max. g PVC-P1) 1) average value Theoretical shot weights for the most important injection moulding materials ARBURG GmbH + Co KG Arthur-Hehl-Strasse 72290 Lossburg Tel.: +49 7446 33-0 www.arburg.com contact@arburg.com © 2024 ARBURG GmbH + Co KG | All data and technical information have been compiled with great care. [...] The relevant valid operating instructions are applicable for the installation and operation of the machine. 290 30 35 40 97 132 172 95 129 168 93 126 165 109 148 194 101 138 180 100 136 178 90 122 160 102 139 181 105 143 187 96 131 171 90 122 160 120 163 213 115 157 205 73 100 130 76 103 134 77 105 137 155 211 276 136 185 242 117 159 208 108 147 192 400 35 40 45 141 184 232 137 179 227 135 176 223 158 207 262 147 192 243 145 190 240 131 171 216 148 193 244 153 199 252 140 183 231 131 171 216 174 227 287 167 219 277 106 139 176 110 143 181 112 146 185 225 294 372 196 256 324 170 222 281 157 205 260 800 45 50 55 291 359 434 284 350 424 278 344 416 327 404 488 304 375 454 300 371 449 270 333 403 305 377 456 316 390 471 289 357 431 270 333 403 359 443 536 346 427 517 219 271 328 227 280 339 232 286 346 465 574 695 408 504 609 351 434 525 324 401 485 SHOT WEIGHTS | 520 S 52 90 82 _E N _G B_ 09 20 24 · Su bj ec t to a lte ra tio ns

ARBURG website wins TYPO3 Award 2024 12/13/2024 ARBURG's website has been honoured at the TYPO3 Awards 2024 in the "Enterprise" category. This is one of a total of 13 evaluated categories and recognises outstanding projects that set standards for websites. ARBURG's relaunch of its website in 2023 was implemented in close collaboration with the agency schöne neue kinder GmbH, which submitted the ARBURG website as a project for the TYPO3 Awards. Competition at the highest level In total, there were 130 submissions by 59 agencies from all over the world. After a pre-selection process, 61 projects made it onto the shortlist and were then assessed by a jury according to the following criteria: Speed/Performance Design/UX SEO Performance Accessibility Best Practices Errors Core Web Vitals User Experience Successful website relaunch With its website relaunch, ARBURG optimised the customer journey and created the ultimate user experience, focusing on internationality, targeted contact initiation and the continuous further development of the website.

DINUS D IN DINUS D IN U S U S 6 X Y B A E 273-1 27 5 1142 20 391 331 60 20 Ø 60 Ø 90 85 17.5 52.5 42 0 28 0 10 0 Ø 12 5H 7 140 10-0.1 17 Ø 24 -0 .1 Ø 18 Ø 24 38.5 3 30 ° 625 MOULD INSTALLATION DIMENSIONS | 370 S MULTI-COMPONENT Central ejection: Stroke max. 125 Stroke max. 400 Robotic system mounting | E M8-16 deep M12-24 deep Ejector bolt | X Bore in mould (if required) | Y min. 200 3001) max. 600 7001) max. 402) Rotary unit3) (optional) 1) Option, required in conjunction with parting line on carrier 2) Dimensions for horizontally displaceable injection unit (VARIO principle) reduced by 20 mm 3) See separate facts and figures for information Central ejection DIN US D IN DIN US D IN U S U S 7 59 6. 5 32 1. 5 Ø 12 5H 7 42 0 315 170 100 42 0 58 5 53 4 17 0 370 50 27 5 20 37 0 465 70 140 210 280 350 420 45 2 35 0 28 0 21 0 14 0 70 65 Ø 50 420 534 480 630 640 Ø 12 5H 7 125 11 0 189 252 31 1. 5 4 x Ø30H7 MOULD INSTALLATION DIMENSIONS | 370 S MULTI-COMPONENT Bores for ARBURG mechanical mould quick-clamping system M12-24 deep M8-16 deep for robotic system Fixed mould mounting platen | A Moving mould mounting platen | B M10 for unscrewing device DINUS D IN DINUS D IN U S U S 8 SW27 12-0.1 M 16 170 266-1 17 0 56.5 20 Ø 24 .8 70 145 C D M 16 52 10.5 (266-1) Ø 29 .8 5f 7 210 144 266 200 18 5 18 5 Ø50 Ø601) Ø80 Ø901) Ø110 60 20 Ø60 Ø90 Ø110 65 X 27 94 x M16 a ab c ab c DEVICE FOR PARTING LINE INJECTION | 370 S MULTI-COMPONENT Mount for vertical injection unit on tie barEjector plate | C Ejector plate reference diameter 170 1) Injection unit 100 2) For dimensions of hydraulic nozzle or mechanical mould mounting, see separate dimension sheet (on request) Off-centre ejection: Stroke max. 120 Injection unit 30 / 70 / 100 Injection unit 170 / 290 Injection positions for injection units2) 30 70 100 170 290 a min. 70 70 70 70 70 a max. 350 350 350 350 350 b min. 70 70 70 70 70 c min. 130 90 90 90 90 Injection unit 30 / 70 / 100 Injection unit 170 / 290 View DEjector coupling (optional) | X Bore in mould (if required) Off-centre ejection DIN US D IN DIN US D IN U S U S 9 C D X SW27 12-0.1 M 16 170 266-1 17 0 56.5 20 Ø 24 .8 180 279 433 M 16 52 10.5 (266-1) Ø 29 .8 5f 7 210 150 266 200 18 5 18 5 Ø50 Ø601) Ø80 Ø901) Ø110 60 20 Ø60 Ø90 Ø110 65 27 5 3053) ab c ab c a DEVICE FOR PARTING LINE INJECTION | 370 S MULTI-COMPONENT Ejector coupling (optional) | X Bore in mould (if required) Mount for vertical injection unit on carrierEjector plate | C Ejector plate reference diameter 170 Off-centre ejection: Stroke max. 120 4 x M16 View | D Injection unit 30 / 70 / 100 Injection unit 170 / 290 Injection unit 30 / 70 / 100 Injection unit 170 / 290 1) Injection unit 100 2) For dimensions of hydraulic nozzle or mechanical mould mounting, see separate dimension sheet (on request) 3) Travel from injection position (a min.) to mould change position Injection positions for injection units2) 30 70 100 170 290 a min. 70 70 70 70 70 a max. 250 250 250 250 250 b min. 70 70 70 70 70 c min. 155 120 120 120 120 Off-centre ejection DINUS D IN DINUS D IN U S U S 10 Injection units according to EUROMAP Screw diameter mm Polystyrene max. g PS Styrene heteropolymerizates max. g SB max. g SAN, ABS1) Cellulose acetate max. g CA1) Celluloseacetobutyrate max. g CAB1) Polymethyl methacrylate max. g PMMA Polyphenylene ether, mod. max. g PPE Polycarbonate max. g PC Polysulphone max. g PSU Polyamides max. g PA 6.6 | PA 61) max. g PA 6.10 | PA 111) Polyoximethylene (Polyacetal) max. g POM Polyethylene terephthalate max. g PET Polyethylene max. g PE-LD max. g PE-HD Polypropylene max. g PP Fluorpolymerides max. g FEP, PFA, PCTFE1) max. g ETFE Polyvinyl chloride max. g PVC-U max. g PVC-P1) Theoretical shot weights for the most important injection moulding materials Injection units according to EUROMAP Screw diameter mm Polystyrene max. g PS Styrene heteropolymerizates max. g SB max. g SAN, ABS1) Cellulose acetate max. g CA1) Celluloseacetobutyrate max. g CAB1) Polymethyl methacrylate max. g PMMA Polyphenylene ether, mod. max. g PPE Polycarbonate max. g PC Polysulphone max. g PSU Polyamides max. g PA 6.6 | PA 61) max. g PA 6.10 | PA 111) Polyoximethylene (Polyacetal) max. g POM Polyethylene terephthalate max. g PET Polyethylene max. g PE-LD max. g PE-HD Polypropylene max. g PP Fluorpolymerides max. g FEP, PFA, PCTFE1) max. g ETFE Polyvinyl chloride max. g PVC-U max. g PVC-P1) 1) average value 70 18 22 25 21 31 40 20 31 39 20 30 39 24 35 45 22 33 42 22 32 42 19 29 37 22 33 42 23 34 44 21 31 40 19 29 37 26 39 50 25 37 48 16 24 30 16 24 31 17 25 32 33 50 65 29 44 57 25 38 49 23 35 45 290 30 35 40 97 132 172 95 129 168 93 126 165 109 148 194 101 138 180 100 136 178 90 122 160 102 139 181 105 143 187 96 131 171 90 122 160 120 163 213 115 157 205 73 100 130 76 103 134 77 105 137 155 211 276 136 185 242 117 159 208 108 147 192 100 20 25 30 29 45 65 28 44 63 27 43 62 32 50 73 30 47 68 30 46 67 27 42 60 30 47 68 31 49 70 28 44 64 26 41 60 35 55 80 34 53 77 22 34 49 22 35 50 23 36 51 46 72 103 40 63 91 35 54 78 32 50 72 30 15 18 9,5 14,0 9,5 13,5 9,5 13,5 11,0 15,5 10,0 14,5 10,0 14,5 9,0 13,0 10,0 14,5 10,5 15,0 9,5 14,0 9,0 13,0 12,0 17,0 11,5 16,5 7,5 10,5 7,5 11,0 7,5 11,0 15,5 22,5 13,5 19,5 11,5 17,0 11,0 15,5 170 25 30 35 54 77 105 53 76 103 52 74 101 61 87 119 56 81 110 56 80 109 50 72 98 57 81 111 58 84 115 53 77 104 50 72 98 66 96 130 64 92 126 41 59 80 42 60 82 43 62 84 86 124 169 76 109 148 65 94 127 60 87 118 SHOT WEIGHTS | 370 S MULTI-COMPONENT DIN US D IN DIN US D IN U S U S ARBURG GmbH + Co KG Arthur-Hehl-Strasse 72290 Lossburg Tel.: +49 7446 33-0 www.arburg.com contact@arburg.com © 2024 ARBURG GmbH + Co KG | All data and technical information have been compiled with great care.

Sustainability with responsibility – our 2024 report 07/29/2025 In our Sustainability Report 2024, we provide impressive evidence of ARBURG's responsible and future-oriented activities in all relevant areas worldwide. [...] As in the previous year, ARBURG achieved a "B" rating from the Carbon Disclosure Project (CDP) in 2024, a good, above-average result. From 2010 to 2024, a total of over 130 million kilograms of CO2 emissions were saved through various measures and initiatives.

MULTILIFT H 3 MULTILIFT H 3+1 Machine size: 270-370 Handling weight: Main axis: 3 kg Secondary axis: 1 kg 2 A E D 15 8 S R P L N M Stroke X-axis 250 1/2-stroke Z-axis Stroke Z-axis Conveyor belt available as an option Safety enclosure available as an option min. 100Mounting surface, fixed mould mounting platen MULTILIFT H 3 3 + - 270 A 1220 250 290 1500 200 470 40 1375 420 270 S 1170 250 290 1500 200 470 40 1375 420 370 A / H / S 1220 280 320 1500 200 700 40 1575 620 270 A 3 600 2000 250 1200 130 270 S 3 600 2000 250 1200 130 370 A / H / S 3 800 2000 250 1200 145 90 5 C-axis Machine type Dim. [...] Axes can be travelled progressively or incrementally (0.1 mm, 1 mm or 10 mm) Programmable sequence branch- es for reliable separation of random samples, bad parts and sprues Data set for the robotic sys- tem integrated in the injection moulding machine data set ○ Robotic system moves in syn- chronisation with the ejector and mould opening movement Interface between robotic system and injection moulding machine ○ Mobile ARBURG operating panel Mobile SELOGICA (AMS) for easy and flexible operation Inputs/outputs for grippers Interface with 8 freely program- mable inputs for monitoring sensors for gripper functions. [...] Pin no.Function Gripper input 1 Gripper input 5 Gripper input 2 Gripper input 6 Gripper input 3 Gripper input 7 Gripper input 4 Gripper input 8 FunctionDesignation Designation 1 2 3 4 5 6 7 8 9 10 11 12 13 S 5001 + 24 V GND S5002 + 24 V GND S 5003 + 24 V GND S5004 + 24 V GND PE S 5001 + 24 V GND S5002 + 24 V GND S 5003 + 24 V GND S5004 + 24 V GND PE 14 15 16 17 18 19 20 21 22 23 24 25 S 5005 + 24 V GND S5006 + 24 V GND S 5007 + 24 V GND S5008 + 24 V GND DINUS D IN U S U S D IN US DIN cyan yellow magenta key cyan yellow magenta key DIN US D IN U S U S D IN USDIN 68 12 45 _E N _G B_ 03 20 26 · Su bj ec t to a lte ra tio ns ARBURG GmbH + Co KG Arthur-Hehl-Strasse 72290 Lossburg Tel.: +49 7446 33-0 www.arburg.com contact@arburg.com © 2026 ARBURG GmbH + Co KG | All data and technical information have been compiled with great care.