News

2017

New MULTILIFT V 40 machine size

14.11.2017
The new MULTILIFT V 40 is evidence of the ongoing consistent expansion of our portfolio of linear robot systems. With a load-bearing capacity of 40 kg, the vertical robot is designed for efficient automation of large ALLROUNDER injection moulding machines in sizes from 630 to 1120.    more...

ARBURG at the formnext 2017

13.11.2017
ARBURG will be on hand with a new concept at the formnext, to be held from 14 to 17 November 2017: visitors to stand E70 in hall 3.1 will be able to "experience" selected parts under test conditions at interactive stations. A freeformer will also process standard PP in a live...more...

ARBURG at the Plastimagen 2017

06.11.2017
ARBURG will be exhibiting the latest in high-end plastic technology on stand 720 at the Plastimagen 2017 trade fair in Mexico City from 7 to 10 November 2017. The focus will be on packaging and automation.              more...

New today 65 is available!

02.11.2017
The new issue of the customer magazine today is now available. You can also browse through our international specialist magazine, which is published in six languages, online. Get an impression of the varied information we provide on the world of plastics...more...

Hybrid ALLROUNDER 1120 H

17.10.2017
The hybrid ALLROUNDER 1120 H extends the clamping force range of the ARBURG product portfolio by 30 % to 6,500 kN. Now the largest high-performance machine in the range, it also features a ground-breaking design and visionary GESTICA control system.                  more...

Visionary GESTICA control system

17.10.2017
With its new dimensions, our visionary GESTICA control system is pushing the boundaries. It is based on all the advantages of the well-proven and industry-standard-setting SELOGICA, but has a look and feel familiar from mobile devices. This makes it even easier and more intuitive to use.        more...

Fakuma 2017: Smart, smarter, ARBURG!

17.10.2017
ARBURG will present "smart" machines, processes and turnkey solutions for efficient plastics processing in Hall A3 at the Fakuma international trade fair to be held from 17 to 21 October 2017 in Friedrichshafen,...more...

25 years of ARBURG Poland

05.10.2017
The ARBURG subsidiary in Poland celebrated its silver anniversary on 26 September 2017. The event was attended by Managing Partner Michael Hehl and Managing Director Sales Gerhard Böhm, as well as around 200 guests.        more...

Our service at a glance

28.09.2017
Benefit from our extensive expertise in service. Our new country-specific ARBURG service flyer provides comprehensive information about all of our services and is specifically tailored to your particular needs.

             more...

ARBURG at the Moldplás 2017

27.09.2017
At the Moldplás 2017, to be held in Batalha (Portugal) from 8 to 11 November, ARBURG will present the automated overmoulding of inserts on a hydraulic ALLROUNDER 1200 T rotary table machine in hall 3, on stand 3B08.        more...

2016

freeformer User Day

09.12.2016
Experts together: on 29 November 2016, the APF team from ARBURG invited customers who use the freeformer to Lossburg to attend a User Day as an opportunity to exchange experiences in additive manufacturing.        more...

120 company-service anniversaries celebrated

07.12.2016
ARBURG's traditional employee anniversary celebrations were held on 2 December 2016. With the Partners and Managing Directors in attendance, a total of 120 members of staff were honoured for 40, 25 and 10 years of service to the company and 25 employees entered retirement.      more...

Ten years of ARBURG in Indonesia

06.12.2016
On 18 November 2016, the ARBURG subsidiary in Indonesia celebrates its ten-year anniversary. In 2006, ARBURG was the first European injection moulding machine manufacturer with a fully-owned subsidiary in Indonesia.      more...

ALLROUNDER 2000 T

16.11.2016
For more precise adaptation to your product requirements, we are extending our range of vertical ALLROUNDER T rotary table machines. The new 2000 T machine size for clamping forces up to 2,000 kN offers a significantly enlarged rotary table with a diameter of 2000 mm, providing even more space for your...more...

ARBURG at the K 2016

11.11.2016
ARBURG's stand "13A13" really pulled in the crowds at the K 2016. The focus of interest was on innovative applications, the topic of Industry 4.0, the freeformer and new features in injection moulding technology – primarily the ALLROUNDER 1120 H with a clamping force of 6,500 kN, GESTICA control system and a new...more...

New today 62 is available!

11.11.2016
The new issue of the customer magazine today is now available. You can also browse through our international specialist magazine, which is published in six languages, online. Get an impression of the varied information we provide on the world of plastics...more...

ARBURG at the formnext 2016

10.11.2016
ARBURG will be presenting the potential of the freeformer and of ARBURG Plastic Freeforming (APF) and how these have developed on stand F70 in Hall 3.1 at the formnext show, which is to be held from 15 to 18 November 2016 in Frankfurt.            more...

ALLROUNDER CUBE

10.11.2016
The new ALLROUNDER CUBE series injection moulding machines are optimised for high-speed applications with cube-mould technology. The two-component machines are available in the machine sizes CUBE 2900 and CUBE 4600 and provide clamping forces of up to 4,600 kN at a distance between tie-bars of up to 1,020...more...

K 2016: our impressions

19.10.2016
On 19 October, the starting date of the K 2016 trade fair, our microsite will contain detailed information about the international launch of the ALLROUNDER 1120 H, all exhibits, applications, partners and current brochures, as well as career opportunities at...more...

ARBURG at the K 2016

29.06.2016
A total of 27 Arburg machines will be on show at the K 2016, to be held in Düsseldorf from 19 to 26 October, presenting innovative applications, processes and turnkey solutions. On its exhibition stand, "13A13", ARBURG will present twelve exhibits that demonstrate the current state of the art, including several...more...

2015

Merry Christmas

21.12.2015
As a successful year comes to an end, we would like to thank all ARBURG customers for the trust they have placed in our innovative, family-run company. Before starting into the new year full of energy and new ideas, we are enjoying the peaceful, snowy winter season in the Black Forest.more...

Winner of ARBURG prize competition

17.12.2015
For the Fakuma 2015, ARBURG hosted a special microsite featuring wide-ranging information. This also included a Newsletter, the subscribers to which were able to participate in a competition. Bernd Winkelmann was drawn as the winner and he personally accepted the prize on 8 December 2015.more...

"Industrie 4.0 – powered by Arburg"

03.12.2015
"Industrie 4.0 – powered by Arburg" was a principal focus with regard to the major topic of production efficiency at the Fakuma 2015. Managing Director Technology & Engineering Heinz Gaub explains the digital factory in which smart products are encoded and identified in order to navigate their own way through...more...

ARBURG at the Plast Eurasia 2015

03.12.2015
At the Plast Eurasia, to be held from 3 to 6 December 2015, ARBURG (Hall 12, Stand 1214) will present the freeformer for industrial additive manufacturing for the first time in the Turkish market. An automated IML application with a hybrid ALLROUNDER will demonstrate the performance capability in the packaging sector.more...

Your chance to gain more expertise!

30.11.2015
Advancement through knowledge: our current training programme enables injection moulders to specifically expand their expertise in plastics processing. Also new for freeformer customers is an "ARBURG Plastic Freeforming" course for users in Lossburg. We also offer numerous courses at our locations worldwide.more...

ARBURG at the formnext

17.11.2015
Two freeformers are to be used by ARBURG (Hall 3.1, Stand E30) at the inaugural formnext trade fair, to be held from 17 to 20 November 2015 in Frankfurt, to demonstrate industrial additive manufacturing on the basis of qualified standard granulates.more...

Electric performance variants

09.11.2015
Greater performance always means a higher investment. To offer you a cost-effective means of adaptation to your individual application, we have specifically classified our electric ALLROUNDER A injection moulding machines based on dynamics, speed and functionality.more...

YouTube: Breaking the one million barrier

03.11.2015
The number of clicks on the "ARBURGofficial" YouTube channel reached one million in October 2015. The platform receives over 500 clicks per day. The machine manufacturer is one of the pioneers in this area in its industry.more...

ARBURG at the Moldplas 2015

28.10.2015
ARBURG is to present the entire range of cost-effective plastic parts production - from one-off parts to high-volume production - on Stand 3B04, Hall 3, at the Moldplas, to be held in Batalha from 28 to 31 October 2015.This is the first time that the freeformer additive manufacturing system will be presented in Portugal.more...

New today 59 is available!

26.10.2015
The new issue of the customer magazine today is now available. You can also browse through our international specialist magazine, which is published in six languages, online. Get an impression of the varied information we provide on the world of plastics processing.more...

2014

2,600 years of ARBURG

08.12.2014
On 5 December 2014, 120 long-term employees were honoured for their service to the company, two of them for 50 years, nine for 40 years and a further 25 for 10 years. This amounts to a combined figure of 2,600 years – impressive evidence of employee loyalty to our family-owned company.more...

ARBURG at the Euromold 2014

24.11.2014
From 25 to 28 November 2014, ARBURG (Hall 11, Stand D25) will present the current progress in the development of ARBURG Plastic Freeforming (AKF) at the Euromold 2014. Two freeformers will demonstrate the industrial additive manufacturing of complex components with supporting structures.more...

Decentralised training of service technicians

21.11.2014
In order to provide optimal service to the customers worldwide, ARBURG will train the service technicians to a unified high standard on a decentralised basis. Jason Ding from ARBURG Shanghai is the first service technician who has undergone the challenging basic course to become a trainer.more...

Award for ARBURG training

19.11.2014
Because they were the best in their year, the Northern Black Forest Chamber of Commerce (IHK) honoured seven ARBURG trainees on 7 November 2014. This is evidence of the excellent training provided by ARBURG and demonstrates that the innovative company develops qualified specialists and expert professionals by its own efforts.more...

ARBURG Packaging Days 2014

07.11.2014
ARBURG held the first ever “Packaging Days” event at its headquarters in Lossburg from 5 to 6 November 2014. Eminent speakers and guests invited from all over the world were expected to attend the international packaging technology conference, which focused on innovations, trends and current market developments.more...

Expansion of ARBURG in Shenzhen

31.10.2014
At the end of September, ARBURG’s Chinese subsidiary in Shenzhen celebrated the official inauguration of its new premises together with 200 invited guests. The move to larger premises will enable the subsidiary to offer better service and improved customer support.more...

ARBURG cooperation in Taiwan

29.10.2014
In the context of the Taipei Plas 2014, Helmut Heinson, Managing Director Sales, and Andrea Carta, Overseas Director, signed a cooperation agreement between ARBURG and the Ming Chi University of Technology in Taiwan, which includes a practical training component.more...

Fakuma 2014: Our summary

27.10.2014
The Fakuma 2014 was highly satisfactory for ARBURG. The machine-construction company from Lossburg was the only exhibitor to cover the entire spectrum from additive manufacturing to injection moulding, once again positioning itself as an industry trend setter.more...

Fakuma 2014: Our impressions

17.10.2014
At the Fakuma 2014, the focus for us was clearly on production efficiency. With ALLROUNDERs and the innovative freeformer, we presented the entire spectrum of cost-effective plastic product manufacture – from one-off parts and multiple-variant small and medium batches through to mass-produced items.more...

Fakuma 2014: Our application highlights

16.10.2014
Our modular ALLROUNDERs can be precisely configured for any application. At the Fakuma 2014, we present a wide range – from the new micro-injection unit and automated mass-production through to a high-speed packaging application and LSR production under clean-room conditions.more...

2013

ALS – Providing more information

10.12.2013
The ARBURG ALS host computer system provides you with up-to-date information on your production processes online anytime, and also helps you with long-term documentation of this data. With our new additional modules, you can now easily satisfy even the special requirements of the medical and automotive sectors, for example.more...

ARBURG at Swiss Plastics

02.12.2013
At the Swiss Plastics trade fair, which will take place from 21 to 23 January 2014, ARBURG (Hall 1, Stand C1061) will present a cost-effective injection moulding solution for technical precision parts: an electric ALLROUNDER 370 E injection moulding machine with servo-electric INTEGRALPICKER V.more...

ARBURG Shanghai celebrates

29.11.2013
ARBURG officially opened its new 1,500 m2 machine warehouse in China with an inauguration ceremony on 22 November 2013. Around 100 customers accepted the invitation to the Shanghai event. The opening event also included a presentation featuring some interesting applications on ALLROUNDER injection moulding...more...

Latest videos

21.11.2013
We regularly add to our Media Centre with new videos on interesting injection moulding solutions and events. It is worth checking regularly for new material. Drop by again soon!more...

EDRIVE – Now even more energy efficient

08.11.2013
We have further developed our electric EDRIVE machine series specifically to be more energy efficient. The auxiliary ejector and nozzle axes are now driven electrically with hydrostatic power transmission as standard. This means that injection moulding machines consume up to 20 % less energy than before.more...

ARBURG at the Euromold

07.11.2013
ARBURG will present its unique freeformer during its debut appearance at the Euromold trade fair in Frankfurt from 3 to 6 December 2013. At our exhibition stand E 121 in Hall 11, you too can experience live the new possibilities the freeformer offers for additive manufacturing!more...

K 2013: our impressions

19.10.2013
The ARBURG Stand A13 in Hall 13 is a real magnet for trade visitors and customers from around the world. In accordance with the great significance of the K 2013 and of the exhibits, we will be presenting our offerings at a 1,650 m2, two-storey exhibition stand featuring a new design.more...

K 2013: fastest application!

17.10.2013
The production of 64 moulded parts in a cycle time of only 1.8 seconds is probably the fastest application at the K 2013. An electric ALLROUNDER 470 A produces more than 128,000 units of this so-called flat dripper for droplet irrigation per hour!more...

K 2013: showtime for the freeformer

16.10.2013
At the K 2013 we are presenting the world premiere of the freeformer and ARBURG Plastic Freeforming (AKF). The show marking the occasion is just as excellent as the revolutionary product idea and the process for additive manufacturing! From 16 to 23 October, the “flexible” artistes are performing every 45 minutes.more...

K 2013: our highlights

16.10.2013
The ARBURG world premieres at the K 2013 are simply a “must-see”. Begin a new era of plastics processing with us. Find out about our new machines and applications. Visit us in Hall 13, Stand A 13. We look forward to your visit!more...

2012

Happy new year

18.12.2012
As the year draws to a close, we would like to thank all ARBURG customers, co-operation partners and friends for their trusting cooperation and loyalty. We wish you and your family a peaceful Christmas season, all the very best and a great start to a prosperous year in 2013.more...

Tips & tricks: Sub-sequences

05.12.2012
Anyone using complex moulds would like their handling to be as simple and safe as possible. With the “Sub-sequences” function, the SELOGICA control system offers you a practical solution that gives machine operators the certainty that they can do nothing wrong.more...

Quick access: one-click navigation

28.11.2012
Have you already used the quick access in the navigation bar? It allows you to access the Injection moulding machine, Robotic systems and Spare parts areas straight from the Start page. Or the Contact form, where you can send us your suggestions.more...

Media Centre: new videos

26.11.2012
In our Media Centre, we present videos on interesting injection moulding solutions and events and more. We continuously update our Media Centre, so it's worth visiting on a regular basis.more...

ARBURG in EUROMAP leadership

23.10.2012
On 18 October 2012, the leadership positions of the European umbrella association for plastics and rubber machinery manufacturers (EUROMAP) have been newly appointed and ARBURG Managing Director Helmut Heinson has been elected as Vice President.more...