News

2021

Next programme: Hidden benefits

29.04.2021
27 May 2021 will see another episode from “arburgXvision”. In the fifth programme entitled “Savings through hidden benefits! Savings - there's still room for improvement”, it's all about production efficiency and the potential savings that can be made as a result. Guests on the programme are Christoph Kiefer, Team...more...

Successful debut with CDP score

28.04.2021
Now we have it in black and white. The category “B” score from the Carbon Disclosure Project (CDP) officially confirms that ARBURG performs better than average in the areas of climate protection, ecology, and CO2 emissions compared with other industry players. Alongside the recently published...more...

ARBURG at tct Asia 2021

27.04.2021
From 26 to 28 May, ARBURG will be presenting an overview of its extensive portfolio for additive manufacturing at the tct Asia 2021 AM trade fair in Shanghai, China. The highlight at stand G70 in hall 7.1 will be a freeformer which will be producing a two-component cap in a unique material combination of original...more...

New: “ScrewPilot” explainer video

19.04.2021
Our new video is here: quick, clear, and convincing! Back in December 2020, ARBURG successfully launched its new series of three-minute explainer videos. In this latest episode, ARBURG expert Thomas Ruf, Process Development, provides a brief, easy-to-understand explanation of all aspects of the aXw Control...more...

Graduation ceremony 2021

14.04.2021
ARBURG held its graduation ceremonies on 9 and 12 April 2021. As was the case last year, the ceremonies were split into four smaller events in order to ensure they were Covid-secure. This year, 59 trainees and students from Baden-Wuerttemberg Cooperative State University (Duale Hochschule Baden-Wuerttemberg/DHBW)...more...

ARBURG at Chinaplas 2021

13.04.2021
At Chinaplas in Shenzhen (China), ARBURG will be presenting its comprehensive range of products for plastics processing from 13 to 16 April 2021. High-end machine technology and turnkey solutions will be on display at stand J21 in Hall 10, and the focus will be on the topics of digitalisation and resource...more...

Hannover Messe Digital Edition

08.04.2021
If you are interested in digitalisation, automation, and circular economy in plastics processing, ARBURG is the right partner for you. This is where our "smart" turnkey system sets new standards. The exhibit will celebrate its premiere at the Hannover Messe Digital Edition from 12 to 16 April 2021.  more...

Böllhoff promotional film

06.04.2021
Roll up! Take a peek into the company with Böllhoff’s promotional film. From 2:10 minutes in, you’ll also discover ALLROUNDER. Learn how the ARBURG host computer system gives our customers increased transparency during production.  more...

aXw "ProcessLog" app

01.04.2021
In the industrial additive manufacturing of parts for medical technology, automotive and aerospace, detailed documentation is essential. For this reason, we have expanded the range of functions of our "arburgXworld" customer portal to include the freeformer.  more...

This was our third broadcast

29.03.2021
Over 650 viewers tuned in to the third arburgXvision broadcast on 25 March 2021. On the topic of "Game without borders - additive manufacturing (AM) breaks down boundaries", ARBURG experts Lukas Pawelczyk, Head of Sales freeformer, and Martin Neff, Head of Plastic Freeforming, offered a wealth of...more...

2020

Preventive Maintenance Webinar

23.07.2020
When your injection moulding machine breaks down, the costs of downtime, repairs and financial damages, resulting from delivering bad parts or not even able to ship parts at all, would make preventive maintenance a financially attractive option. Today, preventive maintenance clearly plays a significant role when...more...

Newsletter for the UK

08.07.2020
ARBURG aims to keep its customers up to date in an informative and interesting way by publishing a regular newsletter for the UK and Ireland. This will contain articles covering technical topics in a concise and readily understandable format. Links will enable to access further information on our...more...

Successful Info Days 2020

07.07.2020
Despite Covid 19: Around 350 students and parents visited the ARBURG Info Days 2020 on 3 and 4 July – naturally observing all the required hygiene precautions. The guests were impressed by the excellent support, in-depth information and advice on the 15 options for vocational traineeships offered by ARBURG.  

today 73 is available!

29.06.2020
The new issue of the customer magazine today is now available. You can also browse through our international specialist magazine, which is published in six languages, online. Get an impression of the varied information we provide on the world of plastics processing.more...

arburgXworld: Register now!

25.06.2020
It's easy to benefit from digital ARBURG services. We brought these together for you in our “arburgXworld” customer portal to support your requirements for even more efficient business processes and services.  more...

Safety and hygiene measures

23.06.2020
Training during the coronavirus pandemic? No problem! Since mid-June, we have once again been offering our extensive range of training courses in Germany, naturally in accordance with the legal requirements. The courses in Lossburg will be held in our new Training Center for the first time. To protect you and...more...

Medical and Clean Room Technology Webinar

16.06.2020
The demand for plastic items created under clean room conditions has exploded. Medical, pharmaceutical and device design companies are in high need of plastic components that can only be created under clean room injection molding conditions.  more...

ARBURG at TCT Asia 2020

16.06.2020
ARBURG will present an overview of its extensive portfolio for additive manufacturing at TCT Asia 2020 in Shanghai, China, from 8 to 10 July. The highlight at stand E25 in hall E5 is the Asian premiere of the freeformer 300-3X.  more...

ARBURG graduation ceremony 2020

05.06.2020
Coronavirus has changed everything. To officially discharge the 56 trainees and students of the Baden-Wuerttemberg Cooperative State University (DHBW) from their training, ARBURG split the traditionally large graduation ceremony into four smaller individual events on 4 and 5 June 2020, making it easier for those...more...

Well over 3 million views

27.05.2020
With approximately 3.3 million views and 12,800 subscribers, ARBURG is the most popular injection moulding machine manufacturer on YouTube. There are currently 175 videos available on the “ARBURGofficial” channel. The most popular film has over 1 million views.  more...

2019

ARBURG blazing new trails

19.07.2019
ARBURG is using a wide range of communication media to gain attention for being an attractive employer and an excellent training provider of vocational training. Our goal is to point out the wide variety of possibilities for professional development and convince potential applicants of our qualities. We use the...more...

Road to Digitalisation in Thailand

10.07.2019
Plastics manufacturing is facing more challenges every day. How can we drive efficiency improvements? How can we reduce waste and increase profit gains? In order to stay competitive, companies have to reconsider their processes and systems. Implementation of data analytics into manufacturing organisations can be...more...

Info Days – training at ARBURG

10.07.2019
Around 600 students, parents, and teachers attended the ARBURG Info Days 2019 from July 04 to 06. The guests had opportunity to learn about the comprehensive training offers of the Lossburg-based mechanical engineering company on site. The varied programme included a professions circuit, a workshop, and...more...

25 years of ARBURG Switzerland

05.07.2019
The ARBURG subsidiary in Switzerland celebrated its 25th anniversary on 27 June 2019 in the presence of Managing Partner Juliane Hehl and Managing Director Sales Gerhard Böhm, as well as some 130 invited guests.  more...

ARBURG Packaging Summit

04.07.2019
The second “Packaging Summit” took place at ARBURG on 25 and 26 June, 2019. About 120 guests from all over the world had come to learn about latest trends, resource efficiency, and circular economy in the packaging industry from leading experts from industry, research, and associations.  more...

ARBURG builds in the USA

01.07.2019
On June 17, 2019, construction work in the US was officially started with a groundbreaking ceremony. The new extension increases the size of the existing company building in Rocky Hill by 2,100 m² to provide almost 80% more space.  more...

today 70 is available!

27.06.2019
The new issue of the customer magazine today is now available. You can also browse through our international specialist magazine, which is published in six languages, online. Get an impression of the varied information we provide on the world of plastics processing.more...

Award for ARBURG

18.06.2019
At the Rapid + TCT 2019 in Detroit (USA), ARBURG was honoured with the coveted People’s Choice Award. The public was fascinated by the two freeformer exhibits, interactive stations and functional components and chose ARBURG as one of the three best exhibitors.  more...

ARBURG Thailand celebrates

23.05.2019
On 17 May 2019, the ARBURG subsidiary in Thailand celebrated the official opening of its new building in Samutprakarn. To mark the occasion, an open house event was held which was attended by around 60 guests who were able to experience the potential of the largest ARBURG showroom in Southeast Asia for...more...

Inauguration ceremony in Portugal

21.05.2019
The official inauguration of the ARBURG Technology Center (ATC) in Marinha Grande, Portugal, took place on 15 May 2019. The new premises offer sufficient space for machines, spare parts and training. 100 guests were able to see the new possibilities for themselves during the open house event.more...

2018

ARBURG at the MSV 2018

01.08.2018
At MSV, to be held in Brno from 1 to 5 October 2018, ARBURG will be showing two highlights in plastics processing. The multi-component injection moulding of a hard/soft combination and the additive manufacturing of one-off functional parts with complex geometries will be demonstrated live on stand 33 in hall...more...

Gather new strength

30.07.2018
The height of the summer season in Germany has been reached and the time has come to recharge your batteries. On this note, ARBURG wishes all of its customers and partners relaxing and revitalising holidays. Gather new strength for exciting autumn months in 2018!      more...

Red Dot Award 2018

24.07.2018
The GESTICA control system from ARBURG has been awarded the coveted, internationally recognised "Red Dot Award 2018" design prize. Following in the footsteps of the freeformer in 2014, this is the second ARBURG product to win this Award.          more...

today 67 is available!

06.07.2018
The new issue of the customer magazine today is now available. You can also browse through our international specialist magazine, which is published in six languages, online. Get an impression of the varied information we provide on the world of plastics processing.      more...

Over 2 million views

28.06.2018
More than 2 million views and around 5.500 subscribers – no other company in the industry is as popular on YouTube. Around 154 videos are currently available on the "ARBURGofficial" channel.            more...

Training live

25.06.2018
Around 600 school students, parents and teachers visited the ARBURG Info Days 2018 event from 14 to 16 June. Guests had the chance to see for themselves the 16 training opportunities offered by ARBURG in Lossburg, including six technical and three commercial professions and seven courses at the Baden-Württemberg Cooperative...more...

Knowledge Award 2018

19.06.2018
At the USU World 2018 on 7 June 2018, ARBURG received the Knowledge Award 2018 of USU GmbH for its innovative concept for the use of knowledge management technologies in service. USU's unymira division presents this award to honour new, inspiring and verifiably successful ideas for practical application of the Knowledge...more...

ARBURG and the World Cup 2018

13.06.2018
The Football World Cup in Russia will be the absolute highlight for all football fans in 2018! From 14 June to 15 July 2018, the whole world will be watching a display of sporting excellence, emotional moments and a culturally united international community.  more...

Successful trade fair appearances

12.06.2018
In April and May 2018, ARBURG presented itself with great success at the large international trade fairs Chinaplas, Hannover Messe, NPE and Plast. The focus was on premieres, the topics of "Industry 4.0" and "digitalisation" as well as numerous innovative applications covering all aspects of injection...more...

ARBURG at the DKT 2018

30.05.2018
At the German Rubber Conference (DKT) in Nuremberg from 2 to 5 July 2018, ARBURG will demonstrate the multi-component injection moulding of hard/soft combinations in hall 12, stand 213.        more...

2017

ARBURG at the Drinktec 2017

28.08.2017
On its Stand 323 in Hall A4 at the Drinktec in Munich from 11 to 15 September, Arburg will present the performance capabilities of the Packaging version of its high-speed hybrid injection moulding machines.      more...

ARBURG Summer Academy

03.08.2017
Eight students once again took advantage of the opportunity to find out all about the technical degree programmes offered by the Baden-Württemberg Cooperative State University (DHBW) during the holidays by attending the five-day Summer Academy at ARBURG.          more...

ARBURG at the Interplas 2017

27.07.2017
ARBURG will present the production-efficient manufacture of plastic parts from high-volume production to one-off parts at the Interplas 2017 to be held in Birmingham (UK) from 26 to 28 September. Injection moulding, automation solutions and additive manufacturing will be...more...

Sea and sand

24.07.2017
ARBURG wishes all of its customers and partners relaxing and revitalising holidays! Whether nearby or far-away, by the sea, in the mountains, in the garden or on your balcony – enjoy the summer break! Look forward to our innovations at the Fakuma 2017.  more...

ARBURG builds a Training Center

19.07.2017
On 13 July 2017, ARBURG celebrated the start of groundwork for a new Training Center at its central location in Lossburg. The new multi-storey building will have 13,700 m2 of usable space and represents an investment for the company of several tens of millions of euros.        more...

25 years of ARBURG in China

18.07.2017
ARBURG celebrated "25 years of ARBURG in China" on 7 July 2017 in the presence of around 200 invited guests. Managing Partner Renate Keinath presented Zhao Tong, Managing Director of the ARBURG organisations in China, with the anniversary sculpture commemorating 25 successful years.    more...

New today 64 is available!

10.07.2017
The new issue of the customer magazine today is now available. You can also browse through our international specialist magazine, which is published in six languages, online. Get an impression of the varied information we provide on the world of plastics...more...

25 years of ARBURG Belgium

05.07.2017
The ARBURG subsidiary in Belgium celebrated its 25th anniversary on 22 June 2017 in the presence of around 50 guests. Managing Partner Renate Keinath presented the anniversary sculpture to subsidiary manager, Simon Bemong.                more...

Industry 4.0 award for ARBURG

06.06.2017
On 22 May 2017, ARBURG was honoured with the "100 Centres of Industry 4.0 Excellence in Baden-Württemberg" award. This award was initiated by the "Industry 4.0 Alliance for Baden-Württemberg" network initiative to honour special achievements in the Industry 4.0 sector.        more...

ARBURG Technolino Day 2017

23.05.2017
Around 50 kindergarten children from Lossburg attended the ARBURG Technolino Day 2017 on 17 May. The young guests were able to discover everything about the company for themselves. The day was organised by 16 ARBURG trainees, who showed great commitment in taking care of the children.        more...

2016

You're on the winning side with us

10.06.2016
With the EURO 2016 in France, an exciting time has begun for football fans and plastics processors alike. Because from football boots and the ball, through to the stand seats, whistles, yellow cards and merchandising articles, plastics are everywhere. ARBURG is also always on target for its customers.  more...

ARBURG at the Plastpol 2016

17.05.2016
At the Plastpol show in Kielce, Poland, to be held from 17 to 20 May 2016, ARBURG will be presenting the new GOLDEN ELECTRIC series as a highlight in Hall E, Stand 25. A hybrid ALLROUNDER will also demonstrate a complex application for the packaging sector.    more...

First Girls’ Day at ARBURG

09.05.2016
ARBURG participated in the German "Girls’ Day" for the first time on 28 April 2016. Eleven girl pupils from the 5th class upwards were awarded practical insights into the technical careers and training opportunities offered by the machine manufacturer in Lossburg.more...

"today" special edition

02.05.2016
In the spring of 2016, important events have taken place at ARBURG. Those wishing to obtain current information on the extension of the Lossburg plant, the new electric machine series, the Technology Days or changes in the Sales management personnel can find out all about these topics in the special edition of...more...

Opening gala at ARBURG Poland

28.04.2016
In the presence of around 110 guests, ARBURG Polska Sp. z o o opened a new ARBURG Technology Center (ATC) in Warsaw on 19 April 2016 with Partners Michael and Eugen Hehl in attendance. The 800 m2 modern building will offer customers even better service.  more...

ARBURG at the Chinaplas 2016

21.04.2016
ARBURG will present the entire spectrum of plastic part production at the Chinaplas from 25 to 28 April 2016 in Shanghai. At Stand E1G01 in Hall E1, a freeformer and two ALLROUNDER injection moulding machines will produce pill-splitters and IML tubs, as one-off parts and in high volume...more...

ARBURG at the Hannover Messe 2016

21.04.2016
At the Hannover Messe 2016, ARBURG will exhibit a fully IT-networked and comprehensively automated production line for individualised office scissors. Here, an ALLROUNDER and a freeformer will be linked via a seven-axis robotic system.more...

New subsidiary in Taiwan

05.04.2016
ARBURG has been represented in Taiwan since 1981. The fully-owned organisation in Taichung officially began to operate on 1 April 2016. Subsidiary manager Michael Huang and eight employees will now provide even better support to customers in Taiwan.  more...

Leonardo da Vinci Award

29.03.2016
ARBURG received the Leonardo da Vinci Award on 17 March 2016 as part of the MECSPE trade fair in Parma, Italy. AIPI, the professional association representing Italy's industrial designers, awarded the international prize to the freeformer for industrial additive manufacturing.more...

Happy Easter

23.03.2016
We can offer you a broad range of innovative machines, processes and applications for plastics processing. Let us help you get spring off to a fresh start and look forward to the ideas we are hatching for you this year.more...

2015

ARBURG expansion in Spain

17.07.2015
On 1 July 2015, the Spanish ARBURG subsidiary in Montcada i Reixac (Barcelona) celebrated the official opening of its new home in the presence of Managing Partner Renate Keinath. The event and the open house on the following day attracted over 110 guests from Spain and Portugal.more...

ARBURG at the MSV 2015

14.07.2015
At the MSV 2015 in Brno, Czech Republic, in Hall G1, Stand 20, ARBURG will present the flexible individualisation of high-volume parts through the interaction of injection moulding and additive manufacturing, using the example of office scissors. The application also represents an illustration of Industry 4.0.more...

Find a position quickly and easily

29.06.2015
As a family-run business and one of the world’s leading machine manufacturers, we offer interesting internships, training opportunities and work experience placements for Baden-Württemberg Cooperative State University (DHBW) courses. School pupils, school-leavers and students can apply for vacancies here online. Unsolicited...more...

Award for freeformer

23.06.2015
At the Plastpol 2015 trade fair in Kielce, Poland, ARBURG was awarded the “Plast Platinum Award” medal in the “Plastics processing machines and systems” category. The award honours the development and implementation of ground-breaking technologies as well as economic and ecological innovations.more...

25 years of ARBURG USA

22.06.2015
ARBURG Inc. celebrated its 25th anniversary in the USA on 16 and 17 June 2015 and opened its new US headquarters. Around 245 customers were impressed by the extensive facilities available that ARBURG offers as of now at the new location in Rocky Hill, Connecticut.more...

ARBURG at the T-Plas 2015

10.06.2015
From 26 to 29 August, at the T-Plas 2015 in Bangkok, Thailand, ARBURG (Hall 101, stand C01) will present a high-end injection moulding machine as well as the freeformer for additive manufacturing to cover the entire production spectrum from one-off parts to mass-produced items.more...

Eugen Hehl receives award

06.05.2015
ARBURG Partner Eugen Hehl was bestowed an award as an outstanding entrepreneur on 5 May 2015: he received the Baden-Württemberg Competence Prize for Innovation and Quality, which is awarded annually by business consultancy TQU Group and trade fair organiser P.E. Schall.more...

THERMOLIFT model refinement

10.04.2015
With the THERMOLIFT, you can dry all common plastic granulates and convey them to the injection moulding machine. The compact device, which works alongside the machine, has been completely redesigned with regard to operation. The drying process can now be conveniently and quickly set and monitored via touch screen.more...

ARBURG at the Plastpol 2015

31.03.2015
From 26 to 29 May, ARBURG will exhibit three applications to represent the broad spectrum of plastic parts production at the Plastpol 2015: a hydraulic and a hybrid ALLROUNDER will produce toy buggies and syringe barrels respectively, while a freeformer will demonstrate mould-free additive manufacturing.more...

US premiere for the freeformer

24.03.2015
The sales launch of the freeformer in America will coincide with the NPE 2015 trade fair in Orlando on 23 March. On Stand W3729, West Hall, Level 2, ARBURG will demonstrate the industrial manufacturing of fully functional plastic parts “live” with two freeformers. A must see event!more...

2014

Electric size 2100 injection unit

09.07.2014
We are expanding our range of injection units for our electric ALLDRIVE machines. The new size 2100 electric injection unit is the largest in the range and permits shot weight of up to 1,286 grams of PS. The modular drive technology consists of proven, standardised individual components.more...

Big, strong ARBURG family

08.07.2014
Social cohesion and dependability represent a highly valued tradition at ARBURG. Just how the company has developed in recent years was experienced by around 6.500 employees, pensioners, family members and partners on 5 July 2014 at the ARBURG Family Day in Lossburg.more...

ARBURG Hungary: Juniális

03.07.2014
ARBURG Hungary once again organised its annual “Juniális” event on 24 June 2014. This time the emphasis was on “Experiencing quality in a whole new way”. Experts from the subsidiary and from the German parent company presented interesting practical applications and specialist presentations to around 60 guests.more...

Material for institutes of higher education

25.06.2014
We have introduced an updated DVD featuring presentation materials specially designed for vocational colleges and universities. It contains extensive image and video material on all topics relating to injection moulding: from machine and robotic technologies, a wide variety of processes, through to production planning.more...

Videos on 10 Years of ARBURG Shanghai

24.06.2014
We regularly add to our Media Centre with new videos on interesting injection moulding solutions and events. It is worth checking regularly for new material. Drop by again soon!more...

25 years of ARBURG Spain

18.06.2014
ARBURG Spain celebrated its twenty-fifth anniversary on 5 June 2014. The subsidiary is now very well appointed, with two ARBURG Technology Centers in Madrid and Barcelona. Managing Partner Renate Keinath presented subsidiary manager Martín Cayre with a commemorative sculpture to mark the anniversary.more...

World Cup: ARBURG sets the tone

11.06.2014
Brazilian rhythms are set to provide the right soundscape in the stadium for the World Cup 2014 in Brazil. Instruments like the so-called bate-bate are being produced by our customer Aspro Plastic in Sorocaba near São Paulo using ALLROUNDER injection moulding machines.more...

4,000 kN electric toggle system

07.06.2014
We are completing our quest to make our electric ALLDRIVE and hybrid HIDRIVE machine series even more comprehensive. The new servo-electric toggle-type clamping unit rounds off the product range with a distance between tie bars of 820 x 820 millimetres and a clamping force of 4,000 kN.more...

New location in Austria

27.05.2014
The ARBURG subsidiary in Austria opened an ATC in Micheldorf on 21 May 2014. This will bring the spare parts service, training rooms and technical centre under one roof. At the inauguration, Managing Partner Juliane Hehl emphasised the importance of the ATC for the company.more...

Ten years of ARBURG Shanghai

08.05.2014
ARBURG Shanghai celebrated its tenth anniversary on 24 April 2014. In the special atmosphere of the 1933 House in Shanghai, over 500 guests enjoyed an extremely varied evening programme. As a highlight, Managing Partner Juliane Hehl presented an anniversary sculpture.more...

2013

Latest videos

19.07.2013
We regularly add to our Media Centre with new videos on interesting injection moulding solutions and events. It is worth checking regularly for new material. Drop by again soon!more...

Optimised toggle system

11.07.2013
In the packaging industry, even a fraction of a second equates to hard cash. This is why we have enhanced our servoelectric toggle-type clamping unit with a distance between tie bars of 920 x 920 mm and a clamping force of 4,600 kN in a targeted manner with regard to dynamics and speed.more...

Perfect water quality

24.06.2013
Corrosion, limescale, bacteria, algae: Poor water quality leads to deposits in cooling and temperature control circuits. Longer cycle times, malfunctions and even expensive repairs can be the consequence. All this can be reliably prevented by water treatment that is optimally adapted to your application purposes.more...

ARBURG Mexico has moved

18.06.2013
On 12 June 2013, Managing Partner Michael Hehl, Managing Directors Helmut Heinson and Jürgen Boll and subsidiary manager Guillermo Fasterling officially opened the new ARBURG Mexico building in centrally located Querétaro.more...

SELOGICA – function packages

17.06.2013
In order to implement even complex injection moulding processes reliably and smoothly, our SELOGICA control system offers a variety of options. We have put together various function packages for you, so that you will always have all the features you require for your specific production requirements.more...

50 Years of ARBURG PIM Expertise

06.06.2013
At the beginning of June, ARBURG celebrated 50 Years of PIM Expertise at the headquarters in Lossburg. Around 200 customers, ARBURG experts and speakers from the world of PIM gathered for this international conference event. A special surprise was the presentation of the 1,000th PIM ALLROUNDER.more...

25 years of ARBURG in Singapore

29.05.2013
ARBURG first gained a foothold in Singapore in 1988. Today, the subsidiary is the sales and service centre for the entire ASEAN region. Managing Partner Juliane Hehl, Managing Director Helmut Heinson and subsidiary manager David Chan celebrated the 25-year anniversary with customers.more...

ALS – Finer planning

15.05.2013
The ARBURG host computer system (ALS) is a valuable tool that enables you to manage your injection moulding production efficiently and optimise capacity utilisation. With our new auxiliary fine planning modules, you can now master the complex challenges of everyday injection moulding production even more reliably.more...

50 years of PIM expertise

14.05.2013
In 2013 ARBURG celebrates 50th year of PIM expertise. Since ARBURG sold its first machine for powder injection moulding (PIM) in 1963, the company has become a leader in the global PIM industry. ARBURG celebrates the 50th anniversary worldwide.more...

What is Blue Competence?

13.05.2013
We have been focusing on the topic of “production efficiency” worldwide since 2012. For this purpose, ARBURG participates, for example, in the “Blue Competence” initiative of the German Engineering Federation (VDMA), promoting innovative, ecological product und production design and environmental technologies.more...

2012

ARBURG: ISO 50001 certified

23.07.2012
In July 2012, we took on a significant challenge: with the TÜV Süd technical inspection agency as a new certifier and ISO 50001 as a new certification. This commits us to the efficient use of energy in all company areas.more...

"today" 49

09.06.2012
The latest issue of our customer magazine "today" is out now.more...

ARBURG opens new “showcase for the world”

04.05.2012
ARBURG now has a new-look website that is certain to point the way for the capital goods market: the injection moulding machine manufacturer is focusing on the global user community with its information offerings and contact opportunities. more...

Award for Herbert Kraibühler

12.03.2012
During the opening of the 26th International Plastics Technology Colloquium hosted by the Institute of Plastics Processing in Aachen on 7 and 8 March 2012, the Georg Menges Award 2012 was presented to the ARBURG Managing Director Herbert Kraibühler.more...

Continental wins ARBURG Award

15.03.2012
On 13 March, Continental, one of the world’s leading automotive suppliers, was presented with the ARBURG  Energy Efficiency Award 2012.more...