The new machine in the hybrid HIDRIVE series with innovative machine technology is particularly good at saving energy and conserving resources, as well as being production-efficient, user-friendly and reliable. New size 520 with 1,500 kN clamping force The size 520 with a clamping force of 1,500 kN can now be seen for the first time at the ARBURG trade fair stand 3101 in Hall A3. The exhibit, an ALLROUNDER 520 H "Premium", will be producing three different moulded parts from ABS in a cycle time of around 50 seconds: a machine base, a feed hopper, and a controller. These three components are subsequently separated from each other in a cutting station and round off a set of 15 parts for a model ALLROUNDER on a scale of 1:18.
Following the launch of the 470 H milestone machine in the spring to mark "100 years of the Hehl family company", the next step has now been taken with the size 520 and 570 machines. New size 520 with 1,500 kN clamping force The size 520 with a clamping force of 1,500 kN is on show for the first time at Fakuma 2023. The exhibit, an Allrounder 520 H "Premium", uses a 1+1+1-cavity mould to produce three different moulded parts from ABS in a cycle time of around 50 seconds: a machine base, a feed hopper, and a controller. These three components are subsequently separated from each other in a cutting station and round off a set of 15 parts for a model Allrounder on a scale of 1:18.
Presseinformation Press release Arburg at Fakuma 2024 Allrounder 520 A: Closures capped directly in the mould · Efficient: Product electrically capped directly in the mould · Supported: Control assistants optimise energy requirement, part quality and availability · Intelligent: Mould monitored by sensors Lossburg, 01/10/2024 At Fakuma 2024, Arburg (Hall A3, Stand 3101) will be exhibiting an Allrounder 520 A "Ultimate", which will be producing high-quality PP closures for personal care products. [...] Electric machine with pilot mould The exhibit, an Allrounder 520 A "Ultimate" with a clamping force of 1,500 kN, will be processing PP from Borealis. [...] Photo 173801 At Fakuma 2024, an electric Allrounder 520 A will be producing closures that are reproducibly capped directly in the mould with the aid of servo motors from Arburg's sister company AMKmotion.
Prestigious partners Kebo (mould), MCC Verstraete (label), Beck (automation) and Intravis (camera inspection) are all involved in the innovative joint IML project centred around an electric Allrounder 520 A in clean room design. Sustainable: Product made from mono-material The pioneering technology was first presented as a proof of concept at Fakuma 2023 and met with a great response. [...] The centrepiece is an electric Allrounder 520 A "Ultimate" with a clamping force of 1,500 kN, designed for fast and sophisticated processes. [...] Photos 196713 An electric Allrounder 520 A Ultimate demonstrates an innovative application for medical technology.
High-performance electric machines for medical technology The exhibit, an electric Allrounder 520 A "Ultimate" with 1,500 kN clamping force, is designed for fast and demanding processes such as thin-wall applications. [...] With the exhibit, attention was also paid to a low carbon footprint, energy efficiency and a compact production cell. Further information: https://iml.mcclabel.com/en/medical-iml-at-fakuma Photo 194732 An innovative application for medical technology is demonstrated by an electric Allrounder 520 A Ultimate. The high-performance machine produces IML centrifuge tubes at Fakuma 2023 as part of a joint project.
Clean room production meets the highest standards of hygiene and product quality. Preventive HIV protection: A production cell around an electric ALLROUNDER 520 A mass produces active ingredient implants made of LSR. [...] Responsible As primary contractor, ARBURG bears responsibility for the complete production cell. This operates directly in a clean room. Whatever the requirement. We'll find the solution. Your ARBURG contact ARBURG solutions used ALLROUNDER 520 A At the heart of the turnkey system is an electric ALLROUNDER 520 A. [...] For example, electric ALLROUNDERs in a stainless steel version or our freeformer. To the industry Are you looking for a similar solution?
A 1+1+1-cavity family mould is used to produce a machine base, feed hopper and controller on a scale of 1:18 in a cycle time of around 50 seconds. These are then separated from each other in a cutting station and complete a 15-part set for a model Allrounder. [...] Photos 194798 The "Premium" performance variant of the hybrid Allrounder 520 H combines a precise clamping unit with planetary roller screw drive and an injection unit with Arburg servo hydraulics (ASH). 196315 At NPE 2024, an Allrounder 520 H "Premium" will be using 100 per cent ABS recyclate to produce three components of a 15-piece set for a model Allrounder on a scale of 1:18.
'There is only a Plan A' ARBURG's 'Plan A' brings together everything the company has to offer on the topics of sustainability, digitalisation, automation and energy efficiency. [...] The exhibit, an ALLROUNDER 520 H Premium, will use a 1+1+1-cavity mould to produce an ALLROUNDER machine base from ABS to a scale of 1:18. [...] ALLROUNDER 520 A Using centrifuge tubes with labels as an example, ARBURG will be unveiling an innovative IML application with added value for the pharmaceutical industry and medical technology at Fakuma 2023.
Fakuma 2024: ALLROUNDER 520 A 10/02/2024 At Fakuma 2024, ARBURG (Hall A3, Stand 3101) will be exhibiting an ALLROUNDER 520 A "Ultimate", which will be producing high-quality PP closures for personal care products. [...] Smart functions and assistants from the GESTICA control system ensure optimised injection moulding processes, intelligent mould position monitoring, a reduced energy requirement, and flawless part quality. Electric machine with pilot mould The exhibit, an ALLROUNDER 520 A "Ultimate" with a clamping force of 1,500 kN, will be processing PP from Borealis. Lightweight flip-top closures for tubes with a moulded part weight of five grams are produced in a cycle time of around nine seconds.
Small footprint - high performance The injection moulding exhibit is production cell built around an electric Allrounder 520 A with a clamping force of 1,500 kN in a clean room design. The machine in the „Ultimate“ performance variant is designed for fast and demanding processes and fulfils the requirements for production in cleanroom class ISO 7. [...] Visual inspection is performed by a camera system integrated into the automation system. Each tube is given a QR code and a part-specific ID for 100 per cent traceability. [...] In addition, there is no contamination with liquid colours or adhesives. Waste can be reduced by a factor of ten. Pictures Allrounder 520 A Medical_DSC9878 At K 2025, a production cell centred around an electric Allrounder 520 A produces medical products with the added value of functional IML labels.