Knowledge Award 2018
At the USU World 2018 on 7 June 2018, ARBURG received the Knowledge Award 2018 of USU GmbH for its innovative concept for the use of knowledge management technologies in service. USU's unymira division presents this award to honour new, inspiring and verifiably successful ideas for practical application of the Knowledge...
ARBURG and the World Cup 2018
The Football World Cup in Russia will be the absolute highlight for all football fans in 2018! From 14 June to 15 July 2018, the whole world will be watching a display of sporting excellence, emotional moments and a culturally united international community.
Successful trade fair appearances
In April and May 2018, ARBURG presented itself with great success at the large international trade fairs Chinaplas, Hannover Messe, NPE and Plast. The focus was on premieres, the topics of "Industry 4.0" and "digitalisation" as well as numerous innovative applications covering all aspects of injection...
ARBURG at the DKT 2018
At the German Rubber Conference (DKT) in Nuremberg from 2 to 5 July 2018, ARBURG will demonstrate the multi-component injection moulding of hard/soft combinations in hall 12, stand 213.
ARBURG at the Plast 2018
At the Plast trade fair to be held in Milan, Italy from 29 May to 1 June 2018, ARBURG will present innovative technologies for Industry 4.0, injection moulding and additive manufacturing in hall 22, on stand C81/D82. The ALLROUNDER 820 H in the new design and with the visionary GESTICA control system will celebrate its trade...
ARBURG at the Rapid.Tech 2018
At the user convention with the Rapid.Tech, to be held from 5 to 7 June 2018 in Erfurt (Germany), ARBURG will present the potential of the freeformer and ARBURG Plastic Freeforming (APF) in hall 2, stand 2-409.
25 years of ARBURG UK
In May, ARBURG Ltd. in Warwick celebrated their 25th anniversary as part of a two-day event with about 90 guests. Managing Partners Juliane and Eugen Hehl, Managing Director Sales Gerhard Böhm and European Director Sales Stephan Doehler attended the evening event on behalf of the parent company. The next day, an Open House...
ARBURG at the NPE 2018
As a state-of-the-art industry trendsetter and a leader in digital transformation and Industry 4.0, ARBURG will be present on stand W1325 in West Hall Level 2 at the NPE, to be held from 7 to 11 May 2018 in Orlando, Florida, USA, where company's hybrid ALLROUNDER 1120 H will celebrate its American...
freeformer User Day
Some 40 experts in additive manufacturing from Germany, France, the UK and Switzerland came to Lossburg on 10 April 2018 for the Freeformer User Day, which was held at ARBURG's German Headquarters.
Ten years ARBURG Mexico
A successful year
Christmas is almost here and an eventful year is coming to a close. We would like to thank all of our customers and partners for the trust they have placed in us and for their great cooperation. We wish you and your families a peaceful Christmas period and look forward to the start of a successful New Year 2018 together with...
ALS User Meeting 2017
On 23 November 2017, around 100 German-speaking users of the ARBURG host computer system (ALS) met in Lossburg to exchange experiences.
We are constantly adding to our Media Centre with new videos on interesting injection moulding solutions and events. It is worthwhile checking these out on a regular basis. You're welcome to take a look any time.
freeformer impresses trade experts
For ARBURG, which has been an exhibitor from the very outset, the formnext 2017 was a great success. More than 21,000 trade visitors attended the leading international trade fair and conference for additive manufacturing in Frankfurt, nearly half of them from abroad. This enabled ARBURG to precisely reach the target group...
ARBURG at the Interplastica 2018
At the Interplastica 2018, to be held in Moscow from 23 to 26 January 2018, ARBURG will present a high-speed thin-wall application for the packaging industry in hall 21, stand 21B25.
We are here for everyone!
The new image brochure and the new employer brochure strikingly convey what ARBURG stands for as a brand and what the company offers to its customers, partners and employees.
New MULTILIFT V 40 machine size
The new MULTILIFT V 40 is evidence of the ongoing consistent expansion of our portfolio of linear robot systems. With a load-bearing capacity of 40 kg, the vertical robot is designed for efficient automation of large ALLROUNDER injection moulding machines in sizes from 630 to 1120.
ARBURG at the formnext 2017
ARBURG will be on hand with a new concept at the formnext, to be held from 14 to 17 November 2017: visitors to stand E70 in hall 3.1 will be able to "experience" selected parts under test conditions at interactive stations. A freeformer will also process standard PP in a live...
ARBURG at the Plastimagen 2017
ARBURG will be exhibiting the latest in high-end plastic technology on stand 720 at the Plastimagen 2017 trade fair in Mexico City from 7 to 10 November 2017. The focus will be on packaging and automation.
New today 65 is available!
freeformer User Day
Experts together: on 29 November 2016, the APF team from ARBURG invited customers who use the freeformer to Lossburg to attend a User Day as an opportunity to exchange experiences in additive manufacturing.
120 company-service anniversaries celebrated
ARBURG's traditional employee anniversary celebrations were held on 2 December 2016. With the Partners and Managing Directors in attendance, a total of 120 members of staff were honoured for 40, 25 and 10 years of service to the company and 25 employees entered retirement.
Ten years of ARBURG in Indonesia
On 18 November 2016, the ARBURG subsidiary in Indonesia celebrates its ten-year anniversary. In 2006, ARBURG was the first European injection moulding machine manufacturer with a fully-owned subsidiary in Indonesia.
ALLROUNDER 2000 T
For more precise adaptation to your product requirements, we are extending our range of vertical ALLROUNDER T rotary table machines. The new 2000 T machine size for clamping forces up to 2,000 kN offers a significantly enlarged rotary table with a diameter of 2000 mm, providing even more space for your...
ARBURG at the K 2016
ARBURG's stand "13A13" really pulled in the crowds at the K 2016. The focus of interest was on innovative applications, the topic of Industry 4.0, the freeformer and new features in injection moulding technology – primarily the ALLROUNDER 1120 H with a clamping force of 6,500 kN, GESTICA control system and a new...
New today 62 is available!
The new issue of the customer magazine today is now available. You can also browse through our international specialist magazine, which is published in six languages, online. Get an impression of the varied information we provide on the world of plastics...
ARBURG at the formnext 2016
ARBURG will be presenting the potential of the freeformer and of ARBURG Plastic Freeforming (APF) and how these have developed on stand F70 in Hall 3.1 at the formnext show, which is to be held from 15 to 18 November 2016 in Frankfurt.
The new ALLROUNDER CUBE series injection moulding machines are optimised for high-speed applications with cube-mould technology. The two-component machines are available in the machine sizes CUBE 2900 and CUBE 4600 and provide clamping forces of up to 4,600 kN at a distance between tie-bars of up to 1,020...
K 2016: our impressions
On 19 October, the starting date of the K 2016 trade fair, our microsite will contain detailed information about the international launch of the ALLROUNDER 1120 H, all exhibits, applications, partners and current brochures, as well as career opportunities at...
ARBURG at the K 2016
A total of 27 Arburg machines will be on show at the K 2016, to be held in Düsseldorf from 19 to 26 October, presenting innovative applications, processes and turnkey solutions. On its exhibition stand, "13A13", ARBURG will present twelve exhibits that demonstrate the current state of the art, including several...
As a successful year comes to an end, we would like to thank all ARBURG customers for the trust they have placed in our innovative, family-run company. Before starting into the new year full of energy and new ideas, we are enjoying the peaceful, snowy winter season in the Black Forest.
Winner of ARBURG prize competition
For the Fakuma 2015, ARBURG hosted a special microsite featuring wide-ranging information. This also included a Newsletter, the subscribers to which were able to participate in a competition. Bernd Winkelmann was drawn as the winner and he personally accepted the prize on 8 December 2015.
"Industrie 4.0 – powered by Arburg"
"Industrie 4.0 – powered by Arburg" was a principal focus with regard to the major topic of production efficiency at the Fakuma 2015. Managing Director Technology & Engineering Heinz Gaub explains the digital factory in which smart products are encoded and identified in order to navigate their own way through...
ARBURG at the Plast Eurasia 2015
At the Plast Eurasia, to be held from 3 to 6 December 2015, ARBURG (Hall 12, Stand 1214) will present the freeformer for industrial additive manufacturing for the first time in the Turkish market. An automated IML application with a hybrid ALLROUNDER will demonstrate the performance capability in the packaging sector.
Your chance to gain more expertise!
Advancement through knowledge: our current training programme enables injection moulders to specifically expand their expertise in plastics processing. Also new for freeformer customers is an "ARBURG Plastic Freeforming" course for users in Lossburg. We also offer numerous courses at our locations worldwide.
ARBURG at the formnext
Two freeformers are to be used by ARBURG (Hall 3.1, Stand E30) at the inaugural formnext trade fair, to be held from 17 to 20 November 2015 in Frankfurt, to demonstrate industrial additive manufacturing on the basis of qualified standard granulates.
Electric performance variants
Greater performance always means a higher investment. To offer you a cost-effective means of adaptation to your individual application, we have specifically classified our electric ALLROUNDER A injection moulding machines based on dynamics, speed and functionality.
YouTube: Breaking the one million barrier
The number of clicks on the "ARBURGofficial" YouTube channel reached one million in October 2015. The platform receives over 500 clicks per day. The machine manufacturer is one of the pioneers in this area in its industry.
ARBURG at the Moldplas 2015
ARBURG is to present the entire range of cost-effective plastic parts production - from one-off parts to high-volume production - on Stand 3B04, Hall 3, at the Moldplas, to be held in Batalha from 28 to 31 October 2015.This is the first time that the freeformer additive manufacturing system will be presented in Portugal.
New today 59 is available!
2,600 years of ARBURG
On 5 December 2014, 120 long-term employees were honoured for their service to the company, two of them for 50 years, nine for 40 years and a further 25 for 10 years. This amounts to a combined figure of 2,600 years – impressive evidence of employee loyalty to our family-owned company.
ARBURG at the Euromold 2014
From 25 to 28 November 2014, ARBURG (Hall 11, Stand D25) will present the current progress in the development of ARBURG Plastic Freeforming (AKF) at the Euromold 2014. Two freeformers will demonstrate the industrial additive manufacturing of complex components with supporting structures.
Decentralised training of service technicians
In order to provide optimal service to the customers worldwide, ARBURG will train the service technicians to a unified high standard on a decentralised basis. Jason Ding from ARBURG Shanghai is the first service technician who has undergone the challenging basic course to become a trainer.
Award for ARBURG training
Because they were the best in their year, the Northern Black Forest Chamber of Commerce (IHK) honoured seven ARBURG trainees on 7 November 2014. This is evidence of the excellent training provided by ARBURG and demonstrates that the innovative company develops qualified specialists and expert professionals by its own efforts.
ARBURG Packaging Days 2014
ARBURG held the first ever “Packaging Days” event at its headquarters in Lossburg from 5 to 6 November 2014. Eminent speakers and guests invited from all over the world were expected to attend the international packaging technology conference, which focused on innovations, trends and current market developments.
Expansion of ARBURG in Shenzhen
At the end of September, ARBURG’s Chinese subsidiary in Shenzhen celebrated the official inauguration of its new premises together with 200 invited guests. The move to larger premises will enable the subsidiary to offer better service and improved customer support.
ARBURG cooperation in Taiwan
In the context of the Taipei Plas 2014, Helmut Heinson, Managing Director Sales, and Andrea Carta, Overseas Director, signed a cooperation agreement between ARBURG and the Ming Chi University of Technology in Taiwan, which includes a practical training component.
Fakuma 2014: Our summary
The Fakuma 2014 was highly satisfactory for ARBURG. The machine-construction company from Lossburg was the only exhibitor to cover the entire spectrum from additive manufacturing to injection moulding, once again positioning itself as an industry trend setter.
Fakuma 2014: Our impressions
At the Fakuma 2014, the focus for us was clearly on production efficiency. With ALLROUNDERs and the innovative freeformer, we presented the entire spectrum of cost-effective plastic product manufacture – from one-off parts and multiple-variant small and medium batches through to mass-produced items.
Fakuma 2014: Our application highlights
ALS – Providing more information
The ARBURG ALS host computer system provides you with up-to-date information on your production processes online anytime, and also helps you with long-term documentation of this data. With our new additional modules, you can now easily satisfy even the special requirements of the medical and automotive sectors, for example.
ARBURG at Swiss Plastics
At the Swiss Plastics trade fair, which will take place from 21 to 23 January 2014, ARBURG (Hall 1, Stand C1061) will present a cost-effective injection moulding solution for technical precision parts: an electric ALLROUNDER 370 E injection moulding machine with servo-electric INTEGRALPICKER V.
ARBURG Shanghai celebrates
ARBURG officially opened its new 1,500 m2 machine warehouse in China with an inauguration ceremony on 22 November 2013. Around 100 customers accepted the invitation to the Shanghai event. The opening event also included a presentation featuring some interesting applications on ALLROUNDER injection moulding...
We regularly add to our Media Centre with new videos on interesting injection moulding solutions and events. It is worth checking regularly for new material. Drop by again soon!
EDRIVE – Now even more energy efficient
We have further developed our electric EDRIVE machine series specifically to be more energy efficient. The auxiliary ejector and nozzle axes are now driven electrically with hydrostatic power transmission as standard. This means that injection moulding machines consume up to 20 % less energy than before.
ARBURG at the Euromold
ARBURG will present its unique freeformer during its debut appearance at the Euromold trade fair in Frankfurt from 3 to 6 December 2013. At our exhibition stand E 121 in Hall 11, you too can experience live the new possibilities the freeformer offers for additive manufacturing!
K 2013: our impressions
The ARBURG Stand A13 in Hall 13 is a real magnet for trade visitors and customers from around the world. In accordance with the great significance of the K 2013 and of the exhibits, we will be presenting our offerings at a 1,650 m2, two-storey exhibition stand featuring a new design.
K 2013: fastest application!
The production of 64 moulded parts in a cycle time of only 1.8 seconds is probably the fastest application at the K 2013. An electric ALLROUNDER 470 A produces more than 128,000 units of this so-called flat dripper for droplet irrigation per hour!
K 2013: showtime for the freeformer
At the K 2013 we are presenting the world premiere of the freeformer and ARBURG Plastic Freeforming (AKF). The show marking the occasion is just as excellent as the revolutionary product idea and the process for additive manufacturing! From 16 to 23 October, the “flexible” artistes are performing every 45 minutes.
K 2013: our highlights
Happy new year
As the year draws to a close, we would like to thank all ARBURG customers, co-operation partners and friends for their trusting cooperation and loyalty. We wish you and your family a peaceful Christmas season, all the very best and a great start to a prosperous year in 2013.
Tips & tricks: Sub-sequences
Anyone using complex moulds would like their handling to be as simple and safe as possible. With the “Sub-sequences” function, the SELOGICA control system offers you a practical solution that gives machine operators the certainty that they can do nothing wrong.
Quick access: one-click navigation
Have you already used the quick access in the navigation bar? It allows you to access the Injection moulding machine, Robotic systems and Spare parts areas straight from the Start page. Or the Contact form, where you can send us your suggestions.
Media Centre: new videos
In our Media Centre, we present videos on interesting injection moulding solutions and events and more. We continuously update our Media Centre, so it's worth visiting on a regular basis.